Specifying the Sewing Functions
By default, no function is set to the three editable controls. When you connect the Multi-Function Foot Control to your machine, a pop up window will open on the screen where you can specify your settings. The control settings can also be accessed anytime from the settings menu, when the foot control is connected. When you disconnect the control from the machine, your settings are stored until the next time you connect it.

Connecting the Foot Control
The Multi-Function Foot Control is USB-powered. No power cord or batteries are needed.
1. Disconnect the original foot control from the machine, if connected.
2. Connect the USB cable (type A) to the USB socket on the bottom right side of the machine.
3. Connect the USB cable (type B) to the USB socket at the front of the foot control.

Specifying Settings
To specify a function, touch the button of the control you want to set and select the desired function in the drop-down list.
To close the pop up window, touch OK.

Reverting to Default Settings
To remove the assigned function from a control, touch the button of the control and select No function assigned in the drop-down list.
To set all editable functions to default settings (No function assigned), select Reset.